Skip Ribbon Commands
Skip to main content

(CIPT2) - Implementing Cisco Unified Communications Manager Part 2 v9.x

Price:

Duration: 5 Days

Audience:

Level:

Technology:

Delivery Method:

Software Assurance Value:

Microsoft CPE:

Course Information

Course Description

​Implementing Cisco Unified Communications Manager, Part 2 (CIPT2) v8.0 prepares you for implementing Cisco Unified Communications solution in a multisite environment. It covers globalized call routing, Cisco Service Advertisement Framework (SAF) and Call Control Discovery (CCD), tail-end hop-off (TEHO), Cisco Unified Survivable Remote Site Telephony (SRST), and mobility features such as Cisco Device Mobility and Cisco Extension Mobility. You will apply a dial plan for a multisite environment including TEHO, configure survivability for remote sites during WAN failure and implement solutions to reduce bandwidth requirements in the IP WAN. 

You will also enable Call Admission Control (CAC) including Session Initiation Protocol (SIP) Preconditions and automated alternate routing (AAR).

Course Objectives

 

  • Describe multisite deployment issues and solutions, and describe and configure required dial plan elements.
  • Implement call-processing resiliency in remote sites by using Cisco Unified SRST,
  • MGCP fallback, and Cisco Unified Communications Manager Express in Cisco Unified SRST mode.
  • Implement bandwidth management and CAC to prevent oversubscription of the IP WAN.
  • Implement Device Mobility and Cisco Extension Mobility.
  • Describe and implement CCD deployments

 

Course Audience

​Network Administrators, Network Engineers, CCNP Voice Candidates, Channel Partners/Resellers, Customers, Employees, System Engineers.

Course Outline

​Module 1: Multisite Deployment Implementation

Lesson 1: Identifying Issues in a Multisite Deployment

Multisite Deployment Issues Overview

Quality Issues

Bandwidth Issues

Availability Issues

Dial Plan Issues

NAT and Security Issues

Lesson 2: Identifying Multisite Deployment Solutions

Multisite Deployment Solution Overview

QoS

Solutions to Bandwidth Limitations

Availability

Dial Plan Solutions

NAT and Security Solutions

Lesson 3: Implementing Multisite Connections

Multisite Connection Options

MGCP Gateway Implementation Review

H.323 Gateway Implementation Review

Trunk Implementation Overview

SIP Trunk Implementation

Intercluster and H.225 Trunk Implementation

Lesson 4: Implementing a Dial Plan for International Multisite Deployments


Multisite Dial Plan Overview

Implementing Site Codes for On-Net Calls

Implementing PSTN Access in Cisco IOS Gateways

Implementing Selective PSTN Breakout


Module 2: Centralized Call-Processing Redundancy Implementation

Lesson 1: Examining Remote Site Redundancy Options

Remote Site Redundancy Overview

Cisco Unified SRST Operation

MGCP Fallback Operation

Cisco Unified SRST Versions and Feature Support

Dial Plan Requirements for MGCP Fallback and Cisco Unified SRST Scenarios

Lesson 2: Implementing SRST and MGCP Fallback


MGCP Fallback and Cisco Unified SRST Configuration Overview

Cisco Unified Communications Manager SRST Configuration

Cisco IOS Gateway SRST Configuration

Cisco IOS Gateway MGCP Gateway Fallback Configuration

Cisco Unified Communications Manager Dial Plan Configuration for SRST Support

Cisco IOS Gateway MGCP Fallback and Cisco Unified SRST Dial Plan

Configuration

Lesson 3: Implementing Cisco Unified Communications Manager Express in SRST Mode


Cisco Unified Communications Manager Express Overview

Cisco Unified Communications Manager Express Features

General Configuration of Cisco Unified Communications Manager Express

Configuration of Cisco Unified Communications Manager Express in SRST Mode


Module 3: Bandwidth Management and CAC Implementation

Lesson 1: Managing Bandwidth

Bandwidth Management Overview

Cisco Unified Communications Manager Codec Configuration

Local Conference Bridge Implementation

Transcoder Implementation

Multicast MOH from Branch Router Flash Implementation

Lesson 2: Implementing CAC

CAC Overview

Standard Locations

RSVP-Enabled Locations

Automated Alternate Routing

SIP Preconditions

H.323 Gatekeeper CAC


Module 4: Implementation of Features and Applications for Multisite Deployments

Lesson 1: Implementing Device Mobility

Issues with Devices Roaming Between Sites

Device Mobility Overview

Device Mobility Configuration Elements

Device Mobility Operation

Device Mobility Interaction with Globalized Call Routing

Device Mobility Configuration

Lesson 2: Implementing Cisco Extension Mobility

Issues when Users Roam Between Sites

Cisco Extension Mobility Overview

Cisco Extension Mobility Configuration Elements

Cisco Extension Mobility Operation

Cisco Extension Mobility Configuration

Module 5: Call Control Discovery

Lesson 1: Implementing SAF and CCD

SAF and CCD Overview

SAF Characteristics

CCD Characteristics

CCD Operation

SAF and CCD Implementation

CCD Considerations

Hands On Labs running Cisco UC 9.x Software

Lab 0: Connection and Orientation to the NterOne Voice Lab Environment

Implementing Basic Multisite Connections

Implementing a Dial Plan for International Multisite Deployments

Implementing SRST and MGCP Fallback

Implementing Cisco Unified Communications Manager Express in SRST Mode

Implementing Bandwidth Management

Implementing CAC

Implementing Device Mobility

Implementing Cisco Extension Mobility

Implementing Cisco SAF and CCD


Course Prerequisites

 

  • Working knowledge of converged voice and data networks.
  • Working knowledge of the MGCP, SIP, and H.323 protocols and their implementation on Cisco IOS gateways.
  • Ability to configure and operate Cisco routers and switches.
  • Ability to configure and operate Cisco Unified Communications Manager in a singlesite environment

 

Course Schedule
This course is not scheduled yet.